realisiert von

Login

- Advertisement -

- Advertisement -

Login

Issue 1 (2011) Volume 4

Issue 1 (2011) Volume 4

Complete issue as PDF

previous issue following issue

Issue Highlights:

Implementation of new mounting conceptsfor mechatronics using cold-gas-sprayed coats

Implementation of new mounting conceptsfor mechatronics using cold-gas-sprayed coats

Within the framework of the presented project, new mounting concepts for power electronics were implemented by applying Al/Cu coat systems to insulators by means of cold gas spraying (CGS). Fabrication technologies for t...

Influence of the carbide feedstock size on the tribologicalcharacteristics of rolled and ground FTCFeCSiMncoatings

Influence of the carbide feedstock size on the tribologicalcharacteristics of rolled and ground FTCFeCSiMncoatings

The tribological properties of thermally sprayed coats are highly dependent on the utilised spraying processes, parameters and the feedstock material. In addition to the chemical composition of the feedstock, the wear re...

Forming of thermally coated sheets forthe production of plastic-metal hybrids withpositive-locking joints

Forming of thermally coated sheets forthe production of plastic-metal hybrids withpositive-locking joints

Light-weight, cost-favourable and high-strength hybrid components can be produced by combining metal and plastic materials in one component. The integrated forming of the sheet in the injection moulding tool using the pr...

Content

34 Articles:

Cover

Regular Features, 1

Advertise Sulzer Metco

Regular Features, 2

Editorial

Dr.-Ing. Clemens Verpoort

Regular Features, 3

Contents

Regular Features, 4 - 5

Advertise DVS Media GmbH

Regular Features, 5

Welcome to Hamburg - Welcome to ITSC 2011!

Events, 6 - 13

Advertise Saint-Gobain Coating Soloutions

Regular Features, 7

Advertise Berolina Metallspritztechnik Wesnigk GmbH

Regular Features, 9

Advertise AMT AG

Regular Features, 11

The Institute of Materials Science at the Leibniz Universität Hannover introduces its FORTIS Division

From Institutes, 14 - 18

Advertise heinz mayer GmbH

Regular Features, 15

Advertise Praxair Surface Technologies GmbH

Regular Features, 17

Advertise DVS Media GmbH

Regular Features, 18

Advertise DVS Expo

Regular Features, 19

New concepts for thermally coated piston rings inmodern two-stroke internal combustion engines

Dipl.-Ing (FH) M. Eng. Marc-Manuel Matz, Dr.-Ing. Marcus Kennedy

Specialist Article, 20 - 24

Advertise GSI SLV München

Regular Features, 25

Advertise DVS Congress / DVS Expo

Regular Features, 25

SUMEBore - Coating solution for cylinderliner surfaces

Dr.-Ing. Peter Ernst, Dipl.-Ing. (FH) Bernd Distler, Gérard Barbezat, Dipl.-Wirt.-Ing. René Schmitt, Dipl.-Ing. Stefan Weltz

Specialist Article, 26 - 29

Cylinder liner technology with a reduced frictionloss for aluminium cylinder crankcases withan optimised weight

Dr.-Ing. Stephan Beer, Dr.-Ing. Christian Klimesch

Specialist Article, 30 - 33

Advertise Linde AG

Regular Features, 34

Process chain for the manufacture of thermallycoated cylinder bores

Dipl.-Ing. (FH) Gerhard Flores

Specialist Article, 35 - 39

Advertise DURUM Verschleißschutz GmbH

Regular Features, 39

High-performance cylinder bore surfaces ofaluminium crankcases

Dr. Bernhard Gand

Specialist Article, 40 - 45

125 years of the automobile - Daimler's LDS cylindertrack opens up a new chapter in engine construction

Dr. Karl Holdik, Dr. Martin Hartweg, Manuel Michel, Roberto De Zolt, Jens Böhm, Dr. Frank Spennemann

Specialist Article, 46 - 50

Implementation of new mounting conceptsfor mechatronics using cold-gas-sprayed coats

Prof. Dr.Ing. habil. Bernhard Wielage, Dr.-Ing. Thomas Grund, Dipl.-Ing. Sabine Kümmel, Prof. Dr.-Ing. Jürgen Wilde, Dipl.-Ing. Eugen Rastjagaev

Peer-reviewed Papers, 51 - 55

Advertise Stellba Schweisstechnik AG

Regular Features, 55

Influence of the carbide feedstock size on the tribologicalcharacteristics of rolled and ground FTCFeCSiMncoatings

Prof. Dr.-Ing. Dipl.-Wirt.Ing. Wolfgang Tillmann, Dipl.-Ing. Weifeng Luo, Dr.-Ing. Jan Nebel

Peer-reviewed Papers, 56 - 63

Advertise DVS Media GmbH

Regular Features, 63

Forming of thermally coated sheets forthe production of plastic-metal hybrids withpositive-locking joints

Prof. Dr.-Ing. Dipl.-Wirt.Ing. Wolfgang Tillmann, Prof. Dr.-Ing. Erman Tekkaya, Dipl.-Ing Boris Rauscher, Dipl.-Ing. Bastian Rüther

Peer-reviewed Papers, 64 - 68

Correction

Regular Features, 69

Advertiser listing

Regular Features, 69

Imprint

Regular Features, 70

Advertise Sulzer Metco

Regular Features, 71

Advertise GTV IMPEX GmbH / GTV Verschleiss-Schutz GmbH

Regular Features, 72

More content

Issue 2 (2024)

Thermal Spray Bulletin

Issue 2 (2024)

Issue 1 (2024)

Thermal Spray Bulletin

Issue 1 (2024)

Issue 2 (2023) Volume 16

Thermal Spray Bulletin

Issue 2 (2023) Volume 16

Find more issues in our archive

- Advertisement -

- Advertisement -

- Advertisement -