realisiert von

Login

- Advertisement -

- Advertisement -

Login

Issue 1 (2012) Volume 5

Issue 1 (2012) Volume 5

Complete issue as PDF

previous issue following issue

Issue Highlights:

Influence of nozzle geometry and impact parameterson microstructure and properties of kinetically sprayed titanium, TiAl6V4 and molybdenum coatings

Influence of nozzle geometry and impact parameterson microstructure and properties of kinetically sprayed titanium, TiAl6V4 and molybdenum coatings

Optimisation of gas heating and nozzle geometry permit higher process gas temperatures and velocities during kinetic spraying. It is thus possible to achieve higher impact parameters that are necessary for the processing...

Thermally sprayed corrosion protection coats on a zinc basis as a supplement tothe hot-dip-galvanisation of components

Thermally sprayed corrosion protection coats on a zinc basis as a supplement tothe hot-dip-galvanisation of components

Commercially available and experimental coating materials on a zinc basis, with and without organic coating, are investigated with regard to their corrosion behaviour in the salt spray test, in the alternating VDA test a...

Laser acoustic surface waves for the non-destructivecharacterisation of thermally sprayed coatings

Laser acoustic surface waves for the non-destructivecharacterisation of thermally sprayed coatings

Im Rahmen der hier vorgestellten Arbeiten wurde die Anwendung von laserakustischen Oberflächenwellen zur Messung des Elastizitätsmoduls (E-Modul) und zur zerstörungsfreien Charakterisierung thermisch gespritzter Schichte...

Content

41 Articles:

Cover

Regular Features, 1

Advertise Sulzer Metco

Regular Features, 2

Editorial

Dr.-Ing. Frank Schreiber

Regular Features, 3

Contents

Regular Features, 4 - 5

Advertise DVS Media GmbH

Regular Features, 5

Workshop on thermal spraying during SVARKA 2012

Events, 6

Advertise ITSC 2012

Regular Features, 6

Advertise Saint-Gobain Coating Solutions

Regular Features, 7

Thermal spray development program for marine structures

Events, 8

Advertise Berolina Metallspritztechnik Wesnigk GmbH

Regular Features, 9

Sulzer Metco is a member of the CCAM team

From companies, 10

Advertise MOGUL METALLIZING GmbH

Regular Features, 10

Advertise camfil FARR Air Pollution Control

Regular Features, 11

Surface Engineering Institute at the RWTH Aachen University introduces itself

From Institutes, 12 - 15

Advertise AMT AG

Regular Features, 13

Advertise DVS Media GmbH

Regular Features, 15

Modern coating solutions in the oil and gas industries

Dr.-Ing. Hans-Michael Höhle, Manfred Oechsle

Specialist Article, 16 - 20

Advertise heinz mayer GmbH

Regular Features, 21

Piston rod coatings in offshore utilisation

Dr.-Ing., MBA Ingo Rühlicke

Specialist Article, 22 - 26

Advertise H.C. Starck GmbH

Regular Features, 27

Thermal coatings for the extraction ofcrude oil and natural gas

Dr.-Ing. Frank Schreiber

Specialist Article, 28 - 32

Advertise Flame Spray Technologies

Regular Features, 31

Milling of thermally sprayed hardmetal coatings

Dr.-Ing. Lutz-Michael Berger, Dipl.-Ing. Jörg Spatzier, Dipl.-Ing. Carsten Hochmuth, Dipl.-Ing. (FH) René Georgi

Specialist Article, 33 - 37

Advertise GSI SLV München

Regular Features, 37

Advertise Linde AG

Regular Features, 38

Advertise TLS surface engineering

Regular Features, 39

Influence of nozzle geometry and impact parameterson microstructure and properties of kinetically sprayed titanium, TiAl6V4 and molybdenum coatings

Dipl.-Wi.-Ing. Kurt Binder, Dr. Frank Gärtner, Prof. Dr. Thomas Klassen

Peer-reviewed Papers, 40 - 46

Advertise Stellba Schweisstechnik AG

Regular Features, 46

Advertise DURUM Verschleiss-Schutz GmbH

Regular Features, 47

Thermally sprayed corrosion protection coats on a zinc basis as a supplement tothe hot-dip-galvanisation of components

Prof. Dr.-Ing. Kirsten Bobzin, Dr.-Ing Nils Kopp, Dipl.-Ing. Thomas Warda, Dipl.-Ing. Christiane Schulz, Dipl.-Ing. Christian Klesen, Dr. rer. nat. Benjamin Poller

Peer-reviewed Papers, 48 - 55

Laser acoustic surface waves for the non-destructivecharacterisation of thermally sprayed coatings

Dr.-Ing. Lutz-Michael Berger, Dr. Dieter Schneider, M. Eng. Maria Manuel Barbosa, Dipl.-Ing. Roberto Puschmann

Peer-reviewed Papers, 56 - 64

Advertise DVS Media GmbH

Regular Features, 63

Advertise Praxair Surface Technologies GmbH

Regular Features, 65

Thermally sprayed, high-temperature-resistantand corrosion-resistant coats:Questions, development and suggestions

Dr.-Ing. habil. Evelina Vogli, Prof. Dr.-Ing. Dipl.-Wirt.Ing. Wolfgang Tillmann

Peer-reviewed Papers, 66 - 71

Job offer

Regular Features, 72 - 73

Advertise DVS Media GmbH

Regular Features, 72

Advertiser listing

Regular Features, 73

Imprint

Regular Features, 74

Buyers guide

Regular Features, 75 - 82

Advertise Sulzer Metco

Regular Features, 83

Advertise GTV Verschleißschutz GmbH

Regular Features, 84

More content

Issue 2 (2024)

Thermal Spray Bulletin

Issue 2 (2024)

Issue 1 (2024)

Thermal Spray Bulletin

Issue 1 (2024)

Issue 2 (2023) Volume 16

Thermal Spray Bulletin

Issue 2 (2023) Volume 16

Find more issues in our archive

- Advertisement -

- Advertisement -

- Advertisement -