realisiert von

Login

- Advertisement -

- Advertisement -

Login

Issue 2 (2014) Volume 7

Issue 2 (2014) Volume 7

Complete issue as PDF

previous issue following issue

Issue Highlights:

Surface functionalisation of high-performance polymers

Surface functionalisation of high-performance polymers

Thermoplastic high-performance polymers such as polyether ether ketone (PEEK) are becoming ever more significant in lightweight construction. The greatest disadvantage of these materials relates to the low wear resistanc...

Study on the Influence of Adhesives on theTensile Adhesive Strength of Sprayed Coatings

Study on the Influence of Adhesives on theTensile Adhesive Strength of Sprayed Coatings

The formation of splats during high-velocity oxy-fuel (HVOF) spraying is closely connected to the condition of the substrate surface. The appearance of the splats changes if the particles are deposited on surfaces with h...

Diagnostics for APS and HVOF spraying processes

Diagnostics for APS and HVOF spraying processes

This article deals with two different coating procedures with thermal spraying (high-velocity oxy-fuel (HVOF) spraying and atmospheric plasma spraying (APS)). In this respect, new results are highlighted for the determin...

Content

38 Articles:

Cover

Regular Features, 93

Advertise Oerlikon Metco AG

Regular Features, 94

Editorial

Regular Features, 95

Contents

Regular Features, 96 - 97

Advertise DVS Media GmbH

Regular Features, 97

Thermal sprayed zinc coatings central topic at Windforce 2014

News, 98 - 100

Advertise voestalpine Böhler Welding

Regular Features, 99

Advertise Berolina Metallspritztechnik Wesnigk GmbH

Regular Features, 101

High-pressure water activation of the cylinder bore surfaces of engine blocks

From companies, 102 - 104

Advertise TLS surface engineering

Regular Features, 103

Advertise Mogul Metallizing GmbH

Regular Features, 104

Advertise camfil Air Pollution Control

Regular Features, 105

The Institute of Fabrication Technology for Ceramic Components (IFKB) at Stuttgart University introduces itself

From Institutes, 106 - 112

Advertise Saint-Gobain

Regular Features, 107

Advertise Praxair Surface Technologies GmbH

Regular Features, 109

Advertise AMT AG

Regular Features, 111

Advertise heinz myer GmbH

Regular Features, 113

The history of thermal spraying: from Max UlrichSchoop to today's era - continuation

Dr.-Ing. SFI MBA Sven Hartmann

Specialist Article, 114 - 120

Advertise GSI SLV München

Regular Features, 119

Advertise DURUM Verschleiss-Schutz GmbH

Regular Features, 121

Single Arc Cascaded Plasma Guns

David Hawley, Ron Molz, Chris Dambra, Dr.-Ing. Konstantin von Niessen, Dr. Malko Gindrat, Sabouni Omar, Dianying Chen

Specialist Article, 122 - 127

Corrosion behavior of stainless steel wire-arc sprayed coatings

Peer-reviewed Papers, 127

Surface functionalisation of high-performance polymers

Dr.-Ing Ruben Winkler, Dipl.-Ing. Gerd Paczkowski, Prof. Dr.-Ing. habil. Christian Rupprecht, Prof. Dr.Ing. habil. Bernhard Wielage

Peer-reviewed Papers, 128 - 133

Advertise DVS Media GmbH

Regular Features, 131

Advertise MEC Metallizing Equipment Co. Pvt. Ltd.

Regular Features, 133

Advertise Linde AG

Regular Features, 134

Advertise Flame Spray Technologies

Regular Features, 135

Emissions in Thermal Spraying - Development of aSuitable Test Method and Evaluation of Measurementsin Laboratory as well as in Industrial Scale

Prof. Dr.-Ing. Kirsten Bobzin, Dipl.-Ing. Thomas Frederik Linke, Prof. Dr. Wolfgang Dott, Dr. rer. nat. Manfred Möller

Peer-reviewed Papers, 136 - 141

Study on the Influence of Adhesives on theTensile Adhesive Strength of Sprayed Coatings

Dipl.-Ing (FH) M. Eng. Marc-Manuel Matz, Dipl.Ing. (FH) Markus Aumiller

Peer-reviewed Papers, 142 - 147

Advertise DVS Media GmbH

Regular Features, 147

Influence of the substrate temperature and thesubstrate hardness on the splat formation of WCbasedcermet powders during HVOF spraying

Peer-reviewed Papers, 148 - 153

Advertise Diamant Metallplastic GmbH

Regular Features, 153

Diagnostics for APS and HVOF spraying processes

Dr.-Ing. Stephan Zimmermann, Cand. M.Sc. Sven Schmettlach, Dipl.-Ing. Stefan Kirner, Dr.-Ing. Günter Forster, Dr. José-Luis Marqués, Prof. Dr. Jochen Schein, Dr.-Ing. Thomas Schläfer

Peer-reviewed Papers, 154 - 161

Advertiser listing

Regular Features, 161

Imprint

Regular Features, 162

Buyers guide

Regular Features, 163 - 172

Advertise Oerlikon Metco AG

Regular Features, 173

Advertise obz

Regular Features, 174

More content

Issue 2 (2024)

Thermal Spray Bulletin

Issue 2 (2024)

Issue 1 (2024)

Thermal Spray Bulletin

Issue 1 (2024)

Issue 2 (2023) Volume 16

Thermal Spray Bulletin

Issue 2 (2023) Volume 16

Find more issues in our archive

- Advertisement -

- Advertisement -

- Advertisement -